Lafomed LFSS03AAA Touch with printer 3 l, class B, medical

Lafomed is a brand of high-level carclaves recognized in more than 50 countries around the world. Autoclaves meet all health standards and directives. These devices have a low rate of rejection. Their microprocessors use electronic modules of the last generation. Lafomed autoclaves are highly efficient and durable, and their management is simple and intuitive.

APPOINTMENT:

LFSS03A Touch is designed to sterilize invasive health products. The device helps prevent cross-contamination. The car is specially designed for hospital offices, dental units, ophthalmological offices and biological research institutes. Designed to sterilize surgical instruments, dental instruments, syringes, etc. Applicable for the sterilization of packed (one- and multi-layer) and unpackaged solids, porous articles and articles according to EN 13060:2004+. Standard A2: 2010. Autoclaves can also be used for non-medical and veterinary purposes.

Attention: The device is not designed to sterilize liquid substances.

Description

High-grade car.

Lafomed LFSS03AA Touch with a 3-L printer is particularly recommended for hospital offices, dentals and ophthalmology, as well as for the biological institutions conducting research projects. It's perfect for hairdresser and salon beauty, tattoo studio and aesthetic medicine salon. The machine is designed to sterilize both medical and non-medical instruments. With the cooperation of the technical divisions of the Lafomed and Activeshop companies, a device has been created that will meet the most demanding users. The sterilization in the upper-class B medical unit ensures full efficiency and safety.

Functionality you appreciate

It's a compact device with a built-in thermo printer. The carclave is equipped with a sensory VC spray and a slot for the SD memory map, which can preserve the results of the cycle. It has 7 fully automatic programmes ; 4 sterilization programmes, 2 testing programmes and a drying programme. The menu is intuitive and a friendly interface in Polish. The pre-heating and heat-keeping functions will also be useful, and Lafomed Touch 3L cartridges are characterized by rapid sterilization programmes. The shortest cycle of sterilization of tools lasts 6 minutes with drying and only 8 minutes for packed instruments. The apparatus has a built-in tank for clean (distilled) water used for sterilization and a waste water tank. The self-diagnosing system will effectively protect the debris and maintain the durability of the device. The autoclave meets all the requirements of the Sanepidnadsor, and it is not necessary to report this to the Technical Supervision Authority after the acquisition of the model.

Automatic sterilization programmes

Sterilization programmes Type of load Total cycle time*

134° Quick Packed and unpacked; complete, textile, installation 8 minutes

134° Universal Packed and unpacked; complete, textile, installation 10 minutes

121° Universal Packed and unpacked; complete, textile, installation 28 minutes

134° Light Without packaging; lite (for use immediately after sterilization) 6 minutes

* Recorded to time after heating the device.

Safeguards with extension (24+12)

The Lafomed AutoClab is guaranteed 24 months. It should be noted here that the guarantee does not depend on the number of autoclave cycles. The guarantee may be extended for a further 12 months, subject to a fee-paying technical inspection at the authorised service centre before the expiry of the basic guarantee period.

Sheet:

medical class B This is the top class of autoclaves, allowing for the most effective sterilization of unpackaged and packaged items, irrespective of the type of instrument.

High quality The cars are manufactured according to ISO 13485 and have a CE 1023 certificate.

3l It's a small, but very practical autoclave. Unlike cluster carclaves, the 3-litre Lafomed carclaves have a water reservoir, can adjust the drying time, the chamber is made of stainless steel. They also have less energy consumption, so they are more economical.

A built-in thermo printer. Not required.

Sterilizing the tools with a dip or a pack. Class B carclave allows sterilization of both unpackaged and packaged instrument (massive or semi).

FC Display Specify time, temperature, pressure and running.

Simple and effective management An intuitive menu allows for the rapid selection of the programme or the setting of parameters, and a suitable interface in Polish.

7 automatic programmes 4 sterilization programmes, 2 testing programmes; Bowie and Dick, as well as a vacuum testing and drying programme.

Short sterilization The fastest programme lasts six minutes, including a cushion, and only eight minutes for packed instruments. The carclave is also able to control the drying time.

SD memory reading Keep digital data and don't worry about the loss or damage of valuable evidence you need.

Small dimensions It takes little space and it is easier to transport than larger carcasses.

High-end Japanese vacuum pump ULVAC. The presence of this pump allowed two tanks (for clean and used water) inside the device.

Busted for clean and used water. The clean water reserve contains distilled or deionized water used for sterilization.

Possibility of discharge of used water from the front or rear of the device. The used water supply is required when the tank is full or close to filling.

Heating and heat maintenance function. The device begins to heated immediately after switching and will remain warm until off to reduce the time of sterilization.

Self-diagnosing system Effective protection against damage.

Double door lock Enhanced system providing mechanical and electronic door protection.

There are two tools. It's optical to insert a tooth tape.

stainless steel chamber 304 This makes it extremely strong and aesthetic, and proves the quality of the device.

High-quality bacterial filter. Replacement every 150 cycles, filters are available in our store.

Compliance with the requirements of Sanepidnadsor No registration is required in the Office of Technical Oversight.

Technical data:

Certifications CE 1023,

iSO 13485 PN-EN 13060: 2004 + A2: 2010

Power 2.9 KW

Tension 220-240B

Hot frequency 50 Hz